|
The
Service Crane is motivated by two considerations of the same cause:
It can substantially reduce the height requirement of the mobile crane
used for erection of the K-10000 tower crane.
It can eliminate the need for a tall mobile crane for servicing of the
Hoist and Trolley Winches on the K-10000.
The Service Crane is a self-telescoping tower crane, which needs mobile
crane assistance for its own installation only for its first 40 ft, whereafter it gains its remaining height by its own devices.
If the K-10000 tower crane is installed to a low
height, and/or if an adequate mobile crane is available on site, the
Service Crane may not be desired or needed.
|